RELX Infinity pods are widely used for their smooth vaping experience, leak-resistant design, and convenient magnetic connection. However, like any vaping component, they can sometimes develop issues such as leaking, burnt taste, weak vapor, or connection problems. The good news is that most of these issues can be fixed easily with a bit of care and basic troubleshooting.
This guide will walk you through the most common problems with RELX Infinity pods and how to fix them effectively.
Understanding RELX Infinity Pods
Before fixing any issue, it’s helpful to understand how RELX Infinity pods work.
Each pod contains:
- Pre-filled e-liquid
- Built-in coil
- Mouthpiece
- Airflow channel
- Metal contact points
The pod connects magnetically to the device and activates when you inhale. Since the coil is built into the pod, most issues are related to liquid, airflow, or connection rather than repairable internal parts.
1. RELX Infinity Pod Not Producing Vapor
Possible Causes:
- Pod not properly connected
- Dirty contact points
- Battery issue in the device
- Faulty pod
Fix:
Step 1: Reinsert the Pod Properly
Remove the pod and insert it again firmly. Make sure it sits securely in the device.
Step 2: Clean the Contact Points
Dirty connectors can block the electrical connection.
- Remove the pod
- Use a dry cotton swab or tissue
- Gently clean both the pod’s metal contacts and the device’s contact pins
Step 3: Check the Device Battery
Make sure your RELX Infinity device is charged. A low battery can prevent vapor production.
Step 4: Try Another Pod
If the issue continues, the pod might be defective. Replace it with a new one.
2. Weak Vapor or Low Performance
Possible Causes:
- Low battery
- Pod nearing empty
- Airflow blockage
Fix:
Step 1: Fully Charge the Device
Low battery reduces vapor output. Charge your device fully and test again.
Step 2: Replace the Pod
If the vapor is weak, the e-liquid inside the pod might be nearly finished.
Step 3: Check Airflow
Inspect the pod for any blockage in the airflow channel.
- Look at the bottom and sides
- Clean gently with tissue if needed
3. Burnt Taste from RELX Infinity Pod
A burnt taste is one of the most unpleasant issues.
Causes:
- Pod is empty
- Coil is worn out
- Chain vaping (too frequent use)
Fix:
Step 1: Replace the Pod Immediately
Once a pod tastes burnt, it cannot be repaired. Replace it with a new one.
Step 2: Avoid Chain Vaping
Give a few seconds between puffs so the coil can absorb enough liquid.
Step 3: Store Properly
Keep pods in a cool place. Heat can dry out the liquid and damage the coil.
4. Leaking RELX Infinity Pod
Leaking is a common issue but can usually be managed.
Possible Causes:
- Damaged pod
- Temperature changes
- Improper handling
Fix:
Step 1: Remove the Pod
If you notice leaking, remove the pod immediately to protect the device.
Step 2: Clean the Device and Pod Area
Use a tissue or cotton swab to clean any leaked liquid inside the device.
Step 3: Replace the Pod
Leaking pods are often defective or worn out. It’s best to replace them.
Step 4: Store Upright
Always keep your device upright to reduce leakage risk.
Step 5: Avoid Heat Exposure
High temperatures can thin the e-liquid, causing leaks.
5. Pod Not Detected by Device
Possible Causes:
- Dirty contacts
- Loose connection
- Faulty pod
Fix:
Step 1: Clean Contact Points Thoroughly
This is the most common solution.
- Remove the pod
- Clean both pod and device connectors
Step 2: Reinsert the Pod Firmly
Make sure it snaps into place properly.
Step 3: Try Another Pod
If the device still doesn’t detect it, the pod might be faulty.
6. Gurgling or Spitting Sound
Sometimes you may hear gurgling or feel liquid in your mouth.
Causes:
- Excess e-liquid in airflow
- Condensation buildup
Fix:
Step 1: Remove the Pod and Clean It
Wipe the bottom and mouthpiece with tissue.
Step 2: Blow Gently Through the Mouthpiece
This helps remove excess liquid from the airflow channel.
Step 3: Clean the Device Interior
Remove any condensation inside the device.
7. Pod Producing No Flavor
Possible Causes:
- Empty pod
- Coil degradation
- Flavor fatigue
Fix:
Step 1: Replace the Pod
If the flavor is gone, the pod is likely finished.
Step 2: Switch Flavors
Sometimes your taste buds get used to a flavor. Switching can help.
8. Condensation Inside Pod Slot
Condensation is normal but can cause issues if not cleaned.
Fix:
- Remove the pod regularly
- Wipe inside the device with a dry tissue
- Keep the area clean and dry
This prevents connection issues and improves performance.
9. Pod Falling Out or Loose Fit
Causes:
- Worn magnets
- Improper pod design
Fix:
Step 1: Clean the Pod Slot
Dirt can prevent proper magnetic connection.
Step 2: Try a New Pod
Some pods may not fit tightly due to manufacturing variation.
10. Tips to Prevent RELX Infinity Pod Problems
Prevention is always better than fixing problems. Follow these tips:
1. Store Properly
Keep your device upright and in a cool, dry place.
2. Clean Regularly
Clean contact points and pod slot at least once a week.
3. Avoid Dropping
Physical damage can cause leaks and connection issues.
4. Use Pods Properly
Don’t use pods beyond their lifespan.
5. Avoid Extreme Temperatures
Heat and cold can affect e-liquid consistency.
6. Don’t Overuse
Give your device a break between puffs.
11. When to Replace RELX Infinity Pods
Pods are disposable and not designed for long-term use. You should replace your pod if:
- It tastes burnt
- Vapor production is low
- Flavor is weak or gone
- It starts leaking
- It has been used for several days
Trying to fix a completely worn-out pod is not effective. Replacement is the best solution.
Conclusion
RELX Infinity pods are designed for convenience, but like all vape components, they can face issues over time. Fortunately, most problems such as leaking, weak vapor, burnt taste, or connection issues can be fixed easily by cleaning, proper handling, or replacing the pod.
The key to a good experience is regular maintenance and proper usage. Keeping your device clean, storing it correctly, and replacing pods when needed will ensure smooth and enjoyable performance.
