The RELX Pod Pro 2 device is known for its sleek design, smooth performance, and user-friendly experience. Manufactured by RELX, this device has become popular among users who prefer a compact and reliable vaping system. However, like any electronic device, it can sometimes develop issues over time. Whether your device is not hitting, leaking, or not charging, this guide will walk you through practical ways to fix common problems.
1. Understanding the RELX Pod Pro 2 Device
Before diving into fixes, it’s important to understand how the device works. The RELX Pod Pro 2 is a closed pod system, meaning it uses pre-filled pods rather than refillable tanks. It operates automatically—no buttons—just inhale to activate. Key components include:
- Battery
- Pod cartridge
- Magnetic connectors
- Airflow system
- Charging port
Most issues arise from one of these components, so identifying the source is the first step to fixing it.
2. Device Not Hitting (No Vapor Production)
One of the most common problems is when the device doesn’t produce vapor.
Possible Causes:
- Dead battery
- Poor pod connection
- Blocked airflow
- Sensor malfunction
Solutions:
Check Battery Level
Make sure your device is charged. If there’s no LED light when you inhale, it’s likely out of power. Plug it in and wait until fully charged.
Clean the Connection Points
Remove the pod and check the gold connectors. Dust, condensation, or e-liquid residue can block the connection. Use a dry cotton swab or tissue to clean both the pod and device contacts.
Reinsert the Pod Properly
Sometimes the pod isn’t seated correctly. Remove it and insert it firmly until it clicks into place.
Check for Airflow Blockage
Inspect the mouthpiece and airflow holes. If they’re blocked by dust or debris, gently clean them.
3. Weak Hits or Low Vapor
If your RELX Pod Pro 2 is producing vapor but it feels weak, there could be several reasons.
Possible Causes:
- Low battery
- Old or nearly empty pod
- Condensation buildup
Solutions:
Charge the Device Fully
Low battery reduces performance. A full charge ensures consistent vapor output.
Replace the Pod
Pods have a lifespan. If the flavor is fading or vapor is weak, switch to a new pod.
Remove Condensation
Condensation can build up inside the pod chamber. Remove the pod and gently wipe the inside with tissue.
4. Device Not Charging
Charging issues can be frustrating, especially if the device appears completely unresponsive.
Possible Causes:
- Faulty cable or adapter
- Dirty charging port
- Battery degradation
Solutions:
Use a Different Charging Cable
Sometimes the issue isn’t the device but the cable. Try another compatible cable.
Clean the Charging Port
Dust or lint can block the connection. Use a toothpick or soft brush to clean it carefully.
Check Power Source
Try a different USB port or adapter to ensure the power source isn’t the problem.
Inspect for Damage
If the device still doesn’t charge, the internal battery might be damaged, and replacement may be necessary.
5. Leaking Pod Issues
Leaking is another common problem with pod systems.
Possible Causes:
- Damaged pod
- Temperature changes
- Improper storage
Solutions:
Replace the Pod
If the pod is cracked or defective, it will leak. Switching to a new one is the easiest fix.
Avoid Extreme Temperatures
Heat can thin the e-liquid, causing leaks. Keep your device in a cool, dry place.
Store Upright
Keeping the device upright helps prevent leakage from the airflow channels.
Clean Excess Liquid
If leakage occurs, remove the pod and clean the inside of the device thoroughly.
6. Burnt Taste
A burnt taste can ruin your experience and is usually a sign of coil or pod issues.
Possible Causes:
- Empty pod
- Overuse of the same pod
- Chain vaping
Solutions:
Check E-Liquid Level
If the pod is empty or nearly empty, replace it immediately.
Take Breaks Between Puffs
Continuous vaping doesn’t allow the coil to re-saturate, leading to dry hits.
Use a New Pod
If the burnt taste persists, the coil inside the pod is likely damaged.
7. Auto-Draw Not Working
The RELX Pod Pro 2 uses an auto-draw system, which can sometimes fail.
Possible Causes:
- Blocked airflow sensor
- Internal condensation
- Sensor malfunction
Solutions:
Blow Gently Into the Device
This can help clear the airflow sensor.
Clean the Internal Chamber
Remove the pod and wipe any moisture inside.
Tap the Device Lightly
Sometimes, a gentle tap can help reset the sensor.
If none of these work, the sensor may be faulty and require professional repair or replacement.
8. LED Indicator Problems
The LED light provides feedback about battery and device status.
Common Issues:
- No light at all
- Blinking unexpectedly
Solutions:
Check Battery
No light usually means no power.
Understand Blink Patterns
Different blinking patterns indicate different issues (low battery, short circuit, etc.). Refer to the device manual if available.
Reset the Device
Disconnect and reconnect the pod to reset internal systems.
9. Preventive Maintenance Tips
To avoid frequent issues, follow these simple maintenance practices:
- Clean the device weekly
- Store it in a cool, dry place
- Avoid overcharging
- Use original pods only
- Handle the device gently
Regular care can significantly extend the life of your RELX Pod Pro 2.
10. When to Replace the Device
Sometimes, fixing isn’t enough. If you notice:
- Battery drains extremely fast
- Device overheats frequently
- Persistent charging issues
- Severe internal damage
…it may be time to replace the device. Continuing to use a faulty vape can lead to poor performance or safety risks.
Conclusion
Fixing a RELX Pod Pro 2 device is usually simple once you identify the problem. Most issues—like weak hits, leaks, or charging problems—can be resolved with basic cleaning, proper handling, and replacing worn-out pods. Regular maintenance plays a huge role in keeping your device running smoothly.
If problems persist despite trying all the solutions above, it’s best to consider replacing the device or seeking help from a professional. A well-maintained RELX device can provide a consistent and satisfying experience for a long time.
