Waka SoPro 10000 Puffs is a high-capacity disposable vape designed for long-term use. It comes with features like a rechargeable battery, LED indicators, and a dual mesh coil system that improves flavor and vapor consistency.
Despite being a premium disposable device, it can still develop issues over time. The good news is that many of these problems are minor and can be fixed at home with simple steps.
This guide explains all common problems and how to fix them safely.
1. Waka SoPro Not Hitting (No Vapor)
This is the most common issue.
Possible Causes:
- Battery drained
- Airflow blocked
- Auto-draw sensor not activating
- Internal connection problem
How to Fix It:
✔ Check LED Indicator
The Waka SoPro has LED lights:
- No light → battery likely dead
- Red light → low battery
- Light but no vapor → coil issue
👉 If there is no light at all, try charging first.
✔ Charge the Device Properly
The device has a rechargeable battery.
- Use a Type-C cable
- Charge for 20–45 minutes
- Avoid fast chargers
Low battery often causes the device to stop hitting even if it still lights up.
✔ Clear Airflow Holes
Dust or lint can block airflow.
- Locate small holes at the bottom
- Use a toothpick gently
- Blow lightly through the mouthpiece
Even a small blockage can stop the auto-draw from working.
✔ Take a Stronger Puff
This device uses a draw-activated sensor:
- Weak puffs may not trigger it
- Take slow, deep inhales
2. Weak Vapor Production
If your vape works but produces less vapor than usual, it’s usually not a serious issue.
Causes:
- Low battery
- Airflow restriction
- Coil not heating fully
- Cold temperature
Fixes:
✔ Fully Charge the Device
Low power reduces vapor output significantly.
✔ Check Boost Mode
The Waka SoPro has a “Boost Mode” that increases power.
- Turn it on for stronger vapor
- Turn it off if battery drains too fast
✔ Warm the Device
Cold weather thickens e-liquid:
- Hold it in your hand for a few minutes
- Do not use external heat
✔ Clean the Mouthpiece
Residue buildup can affect airflow:
- Wipe with tissue
- Keep it clean regularly
3. Burnt Taste Problem
A burnt taste is a sign of coil or liquid issues.
Causes:
- E-liquid running low
- Coil overheating
- Chain vaping
- Dry wick
Fixes:
✔ Stop Using Immediately
Continuing will worsen the burnt taste.
✔ Let It Rest
- Leave it unused for 10–15 minutes
- Allows liquid to re-soak the coil
✔ Avoid Chain Vaping
Taking too many puffs quickly:
- Dries the wick
- Burns the coil
✔ Check Liquid Level (Indirectly)
Even though you can’t see inside:
- Burnt taste + low vapor = empty liquid
👉 Once liquid is finished, it cannot be fixed.
4. Device Charging but Not Working
Sometimes the vape charges but still doesn’t produce vapor.
Causes:
- Coil failure
- Internal disconnection
- Sensor malfunction
Fixes:
✔ Tap the Device Gently
Light tapping may reconnect loose parts:
- Tap against your palm
- Do NOT hit hard
✔ Try Different Puff Style
- Longer inhale
- Slow and steady
✔ Check Charging Cable
- Try another cable
- Use a normal adapter
5. Gurgling or Leaking
If you hear bubbling or get liquid in your mouth:
Causes:
- Excess liquid in coil
- Temperature changes
- Improper storage
Fixes:
✔ Blow Through the Mouthpiece
- Hold tissue at the bottom
- Blow gently
✔ Clean Mouthpiece
- Remove excess liquid
- Keep it dry
✔ Store Upright
- Prevent leakage
- Avoid placing sideways
6. Auto-Firing or Random Activation
Sometimes the vape activates by itself.
This can happen if liquid gets into the airflow sensor.
Fix:
- Blow gently from the bottom airflow
- Let it dry for a few minutes
- Avoid over-inhaling
From user experiences online, this issue can lead to coil burning if not fixed quickly, as the device keeps heating without proper airflow.
7. Airflow Too Tight or Too Loose
Tight Airflow:
- Hard to inhale
- Feels blocked
Fix:
- Clean airflow holes
- Ensure fingers aren’t covering them
Loose Airflow:
- Too airy
- Weak draw
Fix:
- Slightly cover one airflow hole while puffing
8. LED Light Issues
The LED system helps track battery and usage.
Problems:
- No light
- Blinking light
- Incorrect color
Fixes:
✔ Charge First
Most LED issues are due to low battery.
✔ Check for Internal Fault
If LED doesn’t respond:
- Device may be dead
- Internal circuit issue
9. When the Vape Stops Working Completely
Sometimes the device becomes totally unresponsive.
Signs:
- No light
- No vapor
- Doesn’t charge
What to Do:
- Try charging
- Clean airflow
- Try different cable
👉 If nothing works, the device has reached end-of-life.
10. When NOT to Fix the Device
Some problems are unsafe to handle.
Avoid fixing if:
- Battery is swollen
- Device smells burnt internally
- Body is cracked or leaking heavily
- Device overheats
👉 In these cases, dispose of it safely.
11. Safety Tips
Always prioritize safety when handling disposable vapes.
- Do NOT open the device
- Do NOT puncture the battery
- Avoid water exposure
- Do NOT use metal tools inside
- Keep away from heat
12. Tips to Prevent Problems
Prevention is the best way to avoid issues.
✔ Use Moderate Puffs
Avoid chain vaping.
✔ Charge Properly
- Don’t overcharge
- Use correct cable
✔ Store Correctly
- Keep at room temperature
- Avoid sunlight
✔ Keep It Clean
- Clean mouthpiece regularly
- Check airflow holes
✔ Use Boost Mode Carefully
Boost mode increases power but:
- Drains battery faster
- Can overheat coil if overused
Final Thoughts
The Waka SoPro 10000 Puffs is a powerful disposable vape with advanced features like dual mesh coils, LED indicators, and boost mode. While it is more reliable than many smaller disposables, it can still develop common issues like airflow blockage, weak vapor, or burnt taste.
Most of these problems are easy to fix with simple steps like cleaning airflow, charging properly, or letting the coil rest. However, once the e-liquid is finished or the coil is permanently damaged, the device cannot be repaired.
