RELX vape devices are known for their sleek design, leak-resistant pods, and simple operation. Whether you use a RELX Infinity, RELX Essential, RELX Artisan, RELX Phantom, or another compatible device, they are designed to provide a smooth and consistent vaping experience. Despite their reliability, users may occasionally encounter issues such as poor vapor production, charging problems, leaking pods, blinking lights, or burnt flavors.
Fortunately, most RELX vape problems are easy to diagnose and often require only simple maintenance or minor adjustments. Knowing the causes of these issues and the proper troubleshooting methods can help keep your device performing at its best while extending its lifespan.
This guide explains the most common RELX vape issues and offers practical solutions to resolve them.
Understanding How a RELX Vape Works
Before troubleshooting, it’s helpful to understand the basic components of a RELX device.
Most RELX pod systems include:
- Rechargeable battery
- Magnetic pod cartridge
- Built-in heating coil
- Cotton wick
- Airflow sensor
- Charging port
- LED battery indicator
When you inhale through the mouthpiece, the airflow sensor activates the battery. The battery powers the heating coil, which heats the e-liquid absorbed by the wick to produce vapor.
If any of these components malfunction, the device may not perform properly.
RELX Vape Won’t Turn On
If your RELX vape does not respond when you inhale, several factors could be responsible.
Possible Causes
- Battery is completely discharged
- Dirty charging contacts
- Internal battery fault
- Device damage
- Manufacturing defect
How to Fix It
Connect the device to the recommended charging cable and allow it to charge fully.
After charging, disconnect the charger and test the device again.
Inspect the charging contacts for dust or residue and gently clean them with a dry cotton swab.
If the device still does not respond after a full charge, the battery may have failed and the device may need replacement.
Device Produces No Vapor
Sometimes the LED lights up, but little or no vapor is produced.
Common Causes
- Empty pod
- Poor pod connection
- Low battery
- Faulty pod
- Internal coil failure
Solutions
Remove the pod and reinstall it securely.
Ensure the pod is seated correctly on the magnetic contacts.
Recharge the battery if necessary.
If another compatible pod works properly, the original pod may be defective and should be replaced.
Weak Vapor Production
Reduced vapor output is one of the most common user complaints.
Possible Reasons
- Battery is running low
- Pod is nearly empty
- Coil is wearing out
- Restricted airflow
Troubleshooting Steps
Recharge the device fully.
Replace the pod if the e-liquid has nearly been used up.
Inspect airflow openings and remove any visible dust or debris.
Take slow, steady draws rather than forceful inhales to improve vapor consistency.
Burnt Taste
A burnt taste usually indicates the heating coil is no longer receiving enough e-liquid.
Causes
- Empty pod
- Coil has reached the end of its lifespan
- Frequent chain vaping
- Damaged pod
How to Fix It
Replace empty or nearly empty pods promptly.
Avoid taking multiple long puffs in quick succession, as this can dry the wick.
If a new pod immediately tastes burnt, inspect it for damage and replace it if necessary.
Pod Leaking
Although RELX pods are designed to minimize leakage, leaks can occasionally occur.
Common Causes
- Cracked pod
- Damaged seals
- Improper storage
- High temperatures
- Condensation buildup
Solutions
Inspect the pod for cracks or visible damage.
Store the device upright whenever possible.
Avoid exposing the pod to excessive heat or direct sunlight.
Clean excess condensation from the mouthpiece using a tissue or cotton swab.
Replace damaged pods immediately.
Gurgling or Liquid in the Mouth
Occasionally users may notice bubbling sounds or small amounts of e-liquid reaching the mouthpiece.
Possible Causes
- Condensation inside the airflow channel
- Flooded coil
- Drawing too forcefully
Solutions
Remove the pod and wipe the mouthpiece thoroughly.
Hold the device upright for several minutes.
Take slower and gentler puffs instead of hard draws.
Regular cleaning helps prevent condensation buildup.
Charging Problems
If your RELX vape does not charge properly, several simple checks may solve the issue.
Possible Causes
- Dirty charging port
- Faulty charging cable
- Damaged charger
- Battery failure
Troubleshooting
Use the recommended charging cable.
Inspect the charging port carefully and remove dust with a dry soft brush.
Try another USB power source.
Avoid using damaged charging accessories.
If the charging indicator never appears after trying multiple power sources, the battery may require replacement.
LED Light Keeps Blinking
RELX devices use LED lights to indicate battery status and device conditions.
Repeated blinking may indicate:
- Low battery
- Poor pod connection
- Short circuit protection
- Internal malfunction
Recharge the device first.
Remove and reinstall the pod.
Clean the pod contacts using a dry cotton swab.
If blinking continues despite these steps, replace the pod or discontinue using the device if a hardware fault is suspected.
Airflow Feels Restricted
A blocked airflow can reduce both flavor and vapor production.
Common Causes
- Dust
- Pocket lint
- Condensation
- Blocked airflow openings
Solutions
Inspect the airflow holes and mouthpiece.
Clean the exterior using a dry cloth.
Avoid inserting sharp objects into the airflow channels.
Store the vape in a clean, protective case whenever possible.
Poor Flavor Quality
If the flavor becomes weak or dull, the following may be responsible:
- Pod nearing empty
- Coil deterioration
- Low battery
- Old pod
Replacing the pod usually restores full flavor performance.
Keeping the battery adequately charged also helps maintain consistent vapor production.
Device Gets Too Hot
Some warmth during vaping is perfectly normal.
However, excessive heat should never be ignored.
Possible Causes
- Chain vaping
- Charging while vaping
- High ambient temperatures
- Internal battery issue
Safety Tips
Allow the device to cool between vaping sessions.
Do not use the vape while charging.
Avoid leaving it inside hot vehicles or under direct sunlight.
If the device becomes unusually hot or emits unusual smells, discontinue use immediately.
Best Practices to Prevent RELX Vape Problems
Proper maintenance greatly reduces the chance of experiencing common issues.
Helpful habits include:
- Charge the battery before it becomes completely empty.
- Keep the charging contacts clean.
- Store the device upright.
- Protect it from excessive heat and moisture.
- Avoid dropping the device.
- Replace pods when flavor or vapor declines.
- Clean the mouthpiece regularly.
- Avoid taking repeated long puffs without short breaks.
Following these simple practices helps maintain consistent performance and extends the life of your device.
When Should You Replace Your RELX Device or Pod?
Some problems cannot be repaired because pods and batteries naturally wear over time.
Consider replacing the pod or device if:
- Vapor production remains poor after troubleshooting.
- The pod consistently leaks.
- The flavor stays burnt after installing a new pod.
- The battery no longer holds a charge.
- The charging system stops working.
- The device has visible cracks or water damage.
- LED indicators continue flashing despite cleaning and charging.
Replacing worn components ensures better performance and helps maintain safe operation.
Frequently Asked Questions
Why is my RELX vape blinking but not producing vapor?
A blinking light usually indicates a low battery, poor pod connection, or an internal protection feature. Recharge the battery and reinstall the pod before trying again.
Why does my RELX pod taste burnt?
A burnt taste is typically caused by an empty pod, an aging coil, or repeated chain vaping that prevents the wick from staying saturated.
How often should I replace my RELX pod?
Pod lifespan varies depending on usage, but replacing the pod when flavor, vapor production, or overall performance noticeably declines is generally recommended.
Why is my RELX pod leaking?
Leaks may result from physical damage, worn seals, condensation buildup, or improper storage. Always inspect the pod for cracks and keep the device upright whenever possible.
Can I clean my RELX vape?
Yes. Regularly clean the charging contacts, pod connection area, and mouthpiece using a dry cotton swab or soft cloth. Avoid using water or harsh cleaning chemicals on the electronic components.
Conclusion
RELX vape devices are designed to provide a reliable and enjoyable vaping experience, but occasional issues such as charging problems, weak vapor, blinking lights, leaking pods, or burnt flavors can occur over time. Fortunately, most of these problems are easy to resolve with proper troubleshooting, regular cleaning, careful charging, and timely pod replacement.
By maintaining your RELX device properly and following good vaping habits, you can improve performance, extend the lifespan of both the battery and pods, and enjoy a consistently smooth vaping experience. Regular maintenance not only helps prevent common issues but also ensures your device continues to operate safely and efficiently.
